A & P Technology - Standard Product Profiles (biaxial tapes)

PRODUCT CODE	WIDTH		ANGLE	YIELD		FABRIC WEIGHT
	in	mm	+/-	ft/lb	m/kg	oz/yd²	g/m²
MR4933	58.5	1486	0, +/-45°	1.91	1.28	15.5	526
MR5405	59.2	1504	0, +/-60°	1.85	1.24	15.8	536
A&P Technology's Triaxial constructions reduce lay-up time by minimizing quality assurance issues associated with fiber misorientations. Delamination concerns are also dramatically reduced with these single layer constructions. The 0, +/-60 degree fiber orientation allows for a single layer quasi-isotropic architecture providing uniform stiffness properties in all directions.

All technical information and data contained herein is believed accurate and reliable. However, the accuracy and completeness of this information is not guaranteed and is subject to change without notice. A&P Technology shall not be liable for injury, loss or damage whether direct or consequential arising out of the use of the data provided herein.

While A&P Tech does not warrant the suitability for any of its products for any particular use, we are eager to assist you in selecting the right product for your application. We are staffed with experienced professionals in a variety of fields to help you take on your most vexing design, production, quality, and cost reduction challenges.

Want to know more? Contact us.