Zero™ | Non-woven Unidirectional Carbon
ZERO™ is a patented non-woven fabric with a relatively small percentage of binder material (less than 3%). The binder is applied to only one side of the fabric resulting in virtually no crimp in the reinforcement fibers. ZERO™ is highly efficient and very affordable.
Current offerings of ZERO™ are made with standard modulus carbon and intermediate modulus carbon.
| Product Code | Width(in) | Width (mm) | Binder % | Yield (ft/lb) | Yield (m/kg) | Fabric Weight (oz/yd2) | Fabric Weight (g/m2) | Thickness at 50% FV (in) | Thickness at 50% FV (mm) |
|---|---|---|---|---|---|---|---|---|---|
| UNI-4.0SM | 12 | 305 | 1.6 | 35.2 | 23.7 | 4.1 | 139 | .006 | .15 |
| UNI-9.0SM | 12 | 305 | 0.7 | 15.9 | 10.7 | 9.0 | 305 | .014 | .36 |
| UNI-4.3IM | 12 | 305 | 4.4 | 33.1 | 22.2 | 4.3 | 146 | .006 | .15 |
| UNI-5.0IM | 12 | 305 | 3.9 | 28.9 | 19.5 | 5.0 | 168 | .008 | .20 |
All technical information and data contained herein is believed accurate and reliable. However, the accuracy and completeness of this information is not guaranteed and is subject to change without notice. A&P Technology shall not be liable for injury, loss or damage whether direct or consequential arising out of the use of the data provided herein.
While A&P Tech does not warrant the suitability for any of its products for any particular use, we are eager to assist you in selecting the right product for your application. We are staffed with experienced professionals in a variety of fields to help you take on your most vexing design, production, quality, and cost reduction challenges.